74VHCT373AM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 74VHCT373 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Output Type | Tri-State |
| Circuit | 8:8 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Family | AHCT/VHCT |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Logic Type | D-Type Transparent Latch |
| Output Polarity | TRUE |
| Max I(ol) | 0.008 A |
| Independent Circuits | 1 |
| Delay Time - Propagation | 5.1ns |
| Height Seated (Max) | 2.05mm |
| Width | 5.275mm |
| RoHS Status | RoHS Compliant |
74VHCT373AM Overview
In the package 20-SOIC (0.295, 7.50mm Width), it can be found. This package has the format of Tube. In this configuration, the output is set to Tri-State. This electrical device has Logic type D-Type Transparent Latch. Mounting this electronic component follows the Surface Mount method. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C is set as the operating temperature. The 74VHCT series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. This device has been designed with 20 terminations available. It is a member of the 74VHCT373 family. In order to function, the supply voltage should be set to 5V. The 20 pind are equipped with it. In the world of electronics, this electronic device belongs to the family of AHCT/VHCT. In this device, there are 2 ports. It belongs to the subcategory of FF/Latches. 5.5V is the maximum voltage (Vsup) that can be supplied. A total of 5V power supplies are needed to run it. A supply voltage (Vsup) greater than 4.5V is required. Based on its reliable performance, this device is well suited to TAPE AND REEL.
74VHCT373AM Features
20-SOIC (0.295, 7.50mm Width) package
74VHCT series
8 Bits
74VHCT373 family
20 pin count
5V power supplies
74VHCT373AM Applications
There are a lot of ON Semiconductor 74VHCT373AM Latches applications.
- Meter applications
- BCD counting
- Serial Output Register
- Flip-flops
- Shift left register
- Shift left with parallel loading
- Automotive Cluster
- A/D converters
- Frequency
- Ring counter
