74VHCT374AMTC
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2007 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT374AMTC Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tubepackage. The output it is configured with uses Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountis positioned in the way of this electronic part. The supply voltage is set to 4.5V~5.5V. -40°C~85°C TAis the operating temperature. This electronic flip flop is of type D-Type. This type of FPGA is a part of the 74VHCT series. There should be no greater frequency than 130MHzon its output. A total of 1elements are present in it. The number of terminations is 20. The 74VHCT374 family contains it. The D flip flop is powered by a voltage of 5V . Its input capacitance is 4pF farads. Devices in the AHCT/VHCTfamily are electronic devices. It is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. It is designed with a number of bits of 8. Despite its superior flexibility, it relies on 8 circuits to achieve it. This D flip flop is well suited for RAIL based on its reliable performance. It runs on 5Vvolts of power. This flip flop has a total of 2ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V. Despite external influences, it consumes 4μAof quiescent current.
74VHCT374AMTC Features
Tube package
74VHCT series
20 pins
8 Bits
5V power supplies
74VHCT374AMTC Applications
There are a lot of ON Semiconductor 74VHCT374AMTC Flip Flops applications.
- EMI reduction circuitry
- ESCC
- Data storage
- Instrumentation
- Differential Individual
- ESD performance
- 2 – Bit synchronous counter
- Single Down Count-Control Line
- Storage Registers
- Dynamic threshold performance
