74VHCT374AMTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 20 |
| Weight | 191mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 12.5 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 5.6 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT374AMTCX Overview
20-TSSOP (0.173, 4.40mm Width)is the way it is packaged. Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Tri-State, Non-Inverted. The trigger it is configured with uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. In this case, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74VHCT series. This D flip flop should not have a frequency greater than 130MHz. In total, there are 1 elements. Currently, there are 20 terminations. If you search by 74VHCT374, you will find similar parts. It is powered from a supply voltage of 5V. A 4pFfarad input capacitance is provided by this T flip flop. This D flip flop belongs to the family of AHCT/VHCT. A part of the electronic system is mounted in the way of Surface Mount. It is designed with 20 pins. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. It is designed with 8bits. Its flexibility is enhanced by 8 circuits. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. The power supply is 5V. A D flip flop with 2embedded ports is available. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. Despite external influences, it consumes 4μAof quiescent current.
74VHCT374AMTCX Features
Tape & Reel (TR) package
74VHCT series
20 pins
8 Bits
5V power supplies
74VHCT374AMTCX Applications
There are a lot of ON Semiconductor 74VHCT374AMTCX Flip Flops applications.
- Data Synchronizers
- Differential Individual
- Convert a momentary switch to a toggle switch
- Safety Clamp
- Storage registers
- CMOS Process
- Modulo – n – counter
- Data transfer
- Patented noise
- Individual Asynchronous Resets
