74VHCT374AN
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74VHCT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 5.6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VHCT374AN Overview
The flip flop is packaged in a case of 20-DIP (0.300, 7.62mm). The Tubepackage contains it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. Through Holeis in the way of this electric part. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74VHCT series. There should be no greater frequency than 130MHzon its output. D latch consists of 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. The object belongs to the 74VHCT374 family. A 4pFfarad input capacitance is provided by this T flip flop. In this case, the electronic component is mounted in the way of Through Hole. 20pins are included in its design. This device's clock edge trigger type is Positive Edge. The superior flexibility is achieved through the use of 8 circuits. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
74VHCT374AN Features
Tube package
74VHCT series
20 pins
74VHCT374AN Applications
There are a lot of ON Semiconductor 74VHCT374AN Flip Flops applications.
- Power down protection
- Instrumentation
- Memory
- Bus hold
- Single Down Count-Control Line
- EMI reduction circuitry
- Balanced Propagation Delays
- Parallel data storage
- Set-reset capability
- Synchronous counter
