74VHCT574AM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 801mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | 74VHCT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Packing Method | RAIL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74VHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Quiescent Current | 4μA |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 75000000Hz |
| Height | 2.337mm |
| Length | 13.01mm |
| Width | 7.595mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT574AM Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. As configured, the output uses Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74VHCT series. There should be no greater frequency than 130MHzon its output. The list contains 1 elements. It has been determined that there have been 20 terminations. The 74VHCT574 family contains it. The D flip flop is powered by a voltage of 5V . This T flip flop has a capacitance of 4pF farads at the input. A device of this type belongs to the family of AHCT/VHCT. There is an electronic component mounted in the way of Surface Mount. 20pins are included in its design. A Positive Edgeclock edge trigger is used in this device. This part is included in FF/Latches. The flip flop is designed with 8bits. In light of its reliable performance, this T flip flop is well suited for RAIL. The D latch runs on a voltage of 5V volts. A total of 2ports are embedded in the D flip flop. High efficiency requires the supply voltage to be maintained at 5V. It consumes 4μA current. As an additional reference, you may refer to electronic flip flop BROADSIDE VERSION OF 374. 8 channels are available.
74VHCT574AM Features
Tube package
74VHCT series
20 pins
8 Bits
5V power supplies
74VHCT574AM Applications
There are a lot of ON Semiconductor 74VHCT574AM Flip Flops applications.
- Balanced Propagation Delays
- Data transfer
- Bounce elimination switch
- Clock pulse
- Balanced 24 mA output drivers
- ESD performance
- Computing
- Bus hold
- Differential Individual
- Convert a momentary switch to a toggle switch
