74VHCT574ASJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHCT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74VHCT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Number of Ports | 2 |
| Number of Bits | 8 |
| Clock Frequency | 130MHz |
| Propagation Delay | 10.4 ns |
| Turn On Delay Time | 4.1 ns |
| Family | AHCT/VHCT |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 4μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 8mA 8mA |
| Max Propagation Delay @ V, Max CL | 10.4ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Clock Edge Trigger Type | Positive Edge |
| Width | 5.3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VHCT574ASJ Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. It is included in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74VHCTseries of FPGAs. It should not exceed 130MHzin terms of its output frequency. A total of 1elements are present in it. It consumes 4μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. D latch belongs to the 74VHCT574 family. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 4pF farads. It is a member of the AHCT/VHCTfamily of D flip flop. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. Flip flops designed with 8bits are used in this part. To achieve this superior flexibility, 8 circuits are used. This D flip flop is equipped with 0 ports. In order to achieve high efficiency, the supply voltage should be maintained at 5V.
74VHCT574ASJ Features
Tube package
74VHCT series
20 pins
8 Bits
74VHCT574ASJ Applications
There are a lot of ON Semiconductor 74VHCT574ASJ Flip Flops applications.
- Reduced system switching noise
- Parallel data storage
- EMI reduction circuitry
- ESD protection
- Storage registers
- Convert a momentary switch to a toggle switch
- Dynamic threshold performance
- Data storage
- Data transfer
- Registers
