74VHCT74AMTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74VHCT |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 5.8 ns |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Input Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74VHCT74AMTC Overview
The flip flop is packaged in a case of 14-TSSOP (0.173, 4.40mm Width). D flip flop is included in the Tubepackage. This output is configured with Differential. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. Temperature is set to -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74VHCTseries of FPGAs. Its output frequency should not exceed 140MHz. As a result, it consumes 2μA quiescent current and is not affected by external forces. This D latch belongs to the family of 74VHCT74. This JK flip flop has a 4pFfarad input capacitance. It is mounted in the way of Surface Mount. There are 14pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. 2 circuits are used to achieve its superior flexibility. For high efficiency, the supply voltage should be set to 5V. 4input lines are available for you to choose from.
74VHCT74AMTC Features
Tube package
74VHCT series
14 pins
74VHCT74AMTC Applications
There are a lot of ON Semiconductor 74VHCT74AMTC Flip Flops applications.
- ATE
- Data storage
- Matched Rise and Fall
- Patented noise
- Computing
- Synchronous counter
- Bounce elimination switch
- ESD protection
- Frequency Divider circuits
- Single Down Count-Control Line
