74VHCT74AMTCX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 55.3mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 5.8 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Length | 5mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT74AMTCX Overview
In the form of 14-TSSOP (0.173, 4.40mm Width), it has been packaged. You can find it in the Tape & Reel (TR)package. The output it is configured with uses Differential. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. The type of this D latch is D-Type. The FPGA belongs to the 74VHCT series. A frequency of 140MHzshould not be exceeded by its output. The number of terminations is 14. The object belongs to the 74VHCT74 family. A voltage of 5V is used as the power supply for this D latch. Its input capacitance is 4pFfarads. A device of this type belongs to the family of AHCT/VHCT/VT. A part of the electronic system is mounted in the way of Surface Mount. There are 14pins on it. This device's clock edge trigger type is Positive Edge. It is included in FF/Latches. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. It runs on 5Vvolts of power. For high efficiency, the supply voltage should be set to 5V. It consumes 2μA of quiescent current without being affected by external factors. Currently, there are 2 channels available.
74VHCT74AMTCX Features
Tape & Reel (TR) package
74VHCT series
14 pins
5V power supplies
74VHCT74AMTCX Applications
There are a lot of ON Semiconductor 74VHCT74AMTCX Flip Flops applications.
- Modulo – n – counter
- Functionally equivalent to the MC10/100EL29
- Differential Individual
- Divide a clock signal by 2 or 4
- Control circuits
- Asynchronous counter
- Single Down Count-Control Line
- ESCC
- Convert a momentary switch to a toggle switch
- Load Control
