74VHCT74AMX
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Weight | 150mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Number of Outputs | 4 |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Channels | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 140MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 2μA |
| Turn On Delay Time | 8.8 ns |
| Family | AHCT/VHCT/VT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Height | 1.5mm |
| Length | 8.75mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74VHCT74AMX Overview
As a result, it is packaged as 14-SOIC (0.154, 3.90mm Width). It is contained within the Tape & Reel (TR)package. In the configuration, Differentialis used as the output. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. It belongs to the 74VHCTseries of FPGAs. It should not exceed 140MHzin its output frequency. A total of 14 terminations have been made. The object belongs to the 74VHCT74 family. It is powered by a voltage of 5V . A 4pFfarad input capacitance is provided by this T flip flop. A device of this type belongs to the family of AHCT/VHCT/VT. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. This device exhibits a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. High efficiency requires the supply voltage to be maintained at 5V. 2μAquiescent current consumed. It is of 2 channels.
74VHCT74AMX Features
Tape & Reel (TR) package
74VHCT series
14 pins
5V power supplies
74VHCT74AMX Applications
There are a lot of ON Semiconductor 74VHCT74AMX Flip Flops applications.
- Event Detectors
- Frequency Dividers
- Test & Measurement
- Buffer registers
- Shift registers
- Clock pulse
- Dynamic threshold performance
- Balanced 24 mA output drivers
- Registers
- Divide a clock signal by 2 or 4
