74VHCT74ATTR
| Parameters | |
|---|---|
| Base Part Number | 74VHCT74 |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Bits | 1 |
| Clock Frequency | 140MHz |
| Propagation Delay | 8.8 ns |
| Turn On Delay Time | 6.3 ns |
| Family | AHCT/VHCT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 8mA 8mA |
| Max I(ol) | 0.008 A |
| Max Propagation Delay @ V, Max CL | 8.8ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 6pF |
| Number of Input Lines | 1 |
| fmax-Min | 80 MHz |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 65000000Hz |
| Length | 5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74VHCT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
74VHCT74ATTR Overview
14-TSSOP (0.173, 4.40mm Width)is the way it is packaged. The package Tape & Reel (TR)contains it. The output it is configured with uses Differential. It is configured with a trigger that uses a value of Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at 4.5V~5.5Vvolts. In this case, the operating temperature is -55°C~125°C TA. The type of this D latch is D-Type. FPGAs belonging to the 74VHCTseries contain this type of chip. A frequency of 140MHzshould be the maximum output frequency. A total of 2elements are present in it. During its operation, it consumes 2μA quiescent energy. It has been determined that there have been 14 terminations. JK flip flop belongs to 74VHCT74 family. It is powered by a voltage of 5V . Input capacitance of this device is 6pF farads. It belongs to the family of electronic devices known as AHCT/VHCT. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 14 pins. The clock edge trigger type for this device is Positive Edge. This device is part of the FF/Latchesbase part number family. There are 1bits in this flip flop. There is a 5.5Vmaximum supply voltage (Vsup). For normal operation, the supply voltage (Vsup) should be above 4.5V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies. This input has 1lines in it.
74VHCT74ATTR Features
Tape & Reel (TR) package
74VHCT series
14 pins
1 Bits
5V power supplies
74VHCT74ATTR Applications
There are a lot of STMicroelectronics 74VHCT74ATTR Flip Flops applications.
- Power down protection
- CMOS Process
- Dynamic threshold performance
- Bounce elimination switch
- Counters
- Registers
- Parallel data storage
- QML qualified product
- Computing
- Common Clocks
