7705201EX
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -55°C |
| Technology | CMOS |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | ADG508A |
| Pin Count | 16 |
| Temperature Grade | MILITARY |
| Number of Channels | 1 |
| Max Supply Voltage | 16.5V |
| Min Supply Voltage | 10.8V |
| Analog IC - Other Type | SINGLE-ENDED MULTIPLEXER |
| Nominal Supply Current | 1.5mA |
| Power Dissipation | 470mW |
| Throw Configuration | DPST |
| Number of Inputs | 8 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Max Dual Supply Voltage | 16.5V |
| On-State Resistance (Max) | 450Ohm |
| Min Dual Supply Voltage | 10.8V |
| Off-state Isolation-Nom | 68 dB |
| On-state Resistance Match-Nom | 14Ohm |
| Switch-on Time-Max | 300ns |
| Switch-off Time-Max | 300ns |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
7705201EX Overview
Shipping overseas is convenient due to the electrical component's packing in 16-CDIP (0.300, 7.62mm). The advanced packaging method Tube provides high reliability. It is mounted in the position Through Hole. Total terminations are 16. High-quality output is provided by the electronic component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An injection of 16 pins is performed into the body of the electrical component. Use ADG508A to search for variants of the digital switches. Datasheets for functions of 16 pins are available. Multiplexers should not be powered above 16.5V in normal situations. The lowest voltage fed to the electronic component should be 10.8V. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 16.5V. The voltage should be at least 10.8V if you are using dual power supplies. With a SINGLE-ENDED MULTIPLEXER analog IC integrated into the board. Among the inputs that can be operated are the 8 inputs. Temperatures higher than 125°C are not recommended for operation of the analogue multiplexer.
7705201EX Features
1 Channels
7705201EX Applications
There are a lot of Analog Devices Inc. 7705201EX Analog Switches & Multiplexers ICs applications.
- Short/Medium Loop: approximately 2000 ft. of 26 AWG and 5 REN loads
- Mechanical reed relay replacement
- Precision test equipment
- PDH Multiplexers
- Isolation
- Relay replacements
- Optical Applications
- Access Concentrators
- Cable PC
- Sample-and-hold systems
