7705301EA
| Parameters | |
|---|---|
| Max Dual Supply Voltage | 18V |
| On-State Resistance (Max) | 175Ohm |
| Min Dual Supply Voltage | 7V |
| Screening Level | MIL-STD-883 |
| High Level Output Current | 20mA |
| Dual Supply Voltage | 15V |
| Multiplexer/Demultiplexer Circuit | 1:1 |
| Current - Leakage (IS(off)) (Max) | 1nA |
| Channel Capacitance (CS(off), CD(off)) | 5pF 5pF |
| Switch Circuit | SPST - NC |
| Switch Time (Ton, Toff) (Max) | 600ns, 450ns |
| Charge Injection | 20pC |
| Crosstalk | -90dB @ 100kHz |
| Switching | BREAK-BEFORE-MAKE |
| Switch-on Time-Max | 1000ns |
| Switch-off Time-Max | 650ns |
| Normal Position | NC |
| Voltage - Supply, Dual (V±) | ±4.5V~18V |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Factory Lead Time | 1 Week |
| Contact Plating | Lead, Tin |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-CDIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Operating Temperature | -55°C~125°C TA |
| Packaging | Tube |
| Published | 2000 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Subcategory | Multiplexer or Switches |
| Max Power Dissipation | 800mW |
| Technology | CMOS |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 4 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 16 |
| Number of Channels | 1 |
| Max Supply Voltage | 25V |
| Min Supply Voltage | 13V |
| Power Dissipation | 900mW |
| Number of Inputs | 4 |
| Neg Supply Voltage-Nom (Vsup) | -15V |
7705301EA Overview
Due to its 16-CDIP (0.300, 7.62mm) packaging, the electronic part is convenient for international shipping. Advanced packaging method Tube is used to provide high reliability. Mounted in Through Hole is this multiplexer. Multiplexers and demultiplexers have a number of circuits 1:1. Operation at a temperature around -55°C~125°C TA. Total terminations are 16. A high-quality output is provided by the electrical component's 1 channels. In the case of a voltage supply of 15V volts, the electrical part can be powered up and run. An electrical component of this type can be found in the 16 series. A SPST - NC switching circuit is used to build these analog multiplexers. The datasheets for the 16 pins explain the functions. A analogue multiplexer of this type is a Multiplexer or Switches. normally, users should not supply switches with voltages higher than 25V. In order for the electronic part to function properly, the lowest voltage should be 13V. Despite this switch's dual supply capability, its voltage should not exceed 18V. It is recommended that you attach at least 7V to your dual power supply. A 4 input needs to be operated.
7705301EA Features
1 Channels
Switch Circuit: SPST - NC
7705301EA Applications
There are a lot of Maxim Integrated 7705301EA Analog Switches & Multiplexers ICs applications.
- Data switching
- High reliability control systems
- Relay replacements
- Automotive applications
- Cell phones
- Avionics test equipment
- Signal routing between systems
- E1 Network Equipment
- DSLAMs
- Intelligent PBX
