78M6618-IM/F
| Parameters | |
|---|---|
| Number of Terminations | 68 |
| ECCN Code | EAR99 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 78M6618 |
| Pin Count | 68 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | SPI, UART |
| Memory Size | 128kB |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Number of I/O | 19 |
| RAM Size | 4kB |
| Memory Type | FLASH |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 12mA |
| Max Frequency | 5MHz |
| Input Impedance | 40kOhm~90kOhm |
| Meter Type | Single Phase |
| Measurement Error | 0.5% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height | 800μm |
| Length | 8mm |
| Width | 8mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 68-VFQFN Exposed Pad |
| Number of Pins | 68 |
| Weight | 810.002575mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tray |
| Published | 2010 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
78M6618-IM/F Overview
In Tray package. It is packaged in the 68-VFQFN Exposed Pad format. In addition, it can be used as a Single Phase meter as well. Surface Mount is one of the available options. -40°C~85°C achieves a higher operational temperature. 3V~3.6V power supply is used to operate it. If you're looking for similar parts, search 78M6618. A voltage of 0.8V is present on the low-level I/O ports of this PMIC. There is a voltage value of 2V on this device as it is designed for high-level I/Os. 68 terminations are included in the part. A powerful PMIC analog ANALOG CIRCUIT IC. The normal voltage needed for the part is 3.3V. It is important for users to know that this device requires a voltage of 3V or higher in order to function. In order to keep the maximum voltage that goes to the device under 3.6V, the voltage should be kept as low as possible. An assembly of 68 pins is present. This is a logic gate solution based on 68 technology. In order to allow for easy installation and dismounting, it is designed as a Surface Mount device. It should be noted that this is a Other Analog ICs for specialized needs. The memory chip can't run at a higher voltage than 12mA. The device can be supplied with 3.3V. Frequency ranges from 5MHz to X. The PMIC in this case has a memory size 128kB embedded in it. FLASH memory is used by the PMIC.
78M6618-IM/F Features
Single Phase meter.
ANALOG CIRCUIT analog IC.
Operating maximum frequency: 5MHz.
128kB adequate size for target applications.
FLASH memory.
78M6618-IM/F Applications
There are a lot of Maxim Integrated 78M6618-IM/F Energy Metering ICs applications.
- Server Backplane Systems
- Central office equipment
- Intelligent Power Distribution Units
- Real-Time Measurement of Input Power for AC/DC Supplies
- General Purpose Energy Measurement
- Power Monitoring for Home Automation
- Power monitoring instruments
- Poly-phase energy meters of class 0.5S and class 1
- Power monitoring/power budgeting
- PCs/servers
