78M6631-IM/F
| Parameters | |
|---|---|
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Analog ICs |
| Technology | CMOS |
| Voltage - Supply | 3V~3.6V |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 78M6631 |
| Pin Count | 56 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 1 |
| Interface | I2C, UART |
| Memory Size | 128kB |
| Analog IC - Other Type | POWER SUPPLY MANAGEMENT CIRCUIT |
| Number of I/O | 17 |
| RAM Size | 4kB |
| Memory Type | FLASH |
| Adjustable Threshold | NO |
| Current - Supply | 9.1mA |
| Data Bus Width | 8b |
| Supply Current-Max (Isup) | 12mA |
| Max Frequency | 10MHz |
| Input Impedance | 40kOhm~90kOhm |
| Meter Type | 3 Phase |
| Measurement Error | 0.5% |
| Voltage - I/O Low | 0.8V |
| Voltage - I/O High | 2V |
| Height Seated (Max) | 0.8mm |
| Length | 7mm |
| REACH SVHC | Unknown |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 56-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 56 |
| Weight | 191.387631mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2011 |
| Series | Teridian™ |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
78M6631-IM/F Overview
Packged in Tube. Packet 56-WFQFN Exposed Pad. It can also be used as a 3 Phase meter. There is an option for Surface Mount. The operational temperature at -40°C~85°C has been increased. The power supply is 3V~3.6V. The following parts are also available on 78M6631 if you are interested in finding more. The I/O ports on this PMIC have a voltage of zero on their low-level interfaces. This device is capable of delivering voltages of 2V for high-level I/Os on its pins. There are 56 terminations on the part. The PMIC analog POWER SUPPLY MANAGEMENT CIRCUIT IC is a powerful device. A normal voltage will be needed for this part, which is 3.3V. The device requires a voltage of 3V or higher to operate. As far as the maximum voltage that will be applied to the device is concerned, it should be kept below 3.6V. The 56 pins are connected by 56 pins. In this case, it is a 56 solution for logic gate applications. Specifically, this is a Other Analog ICs for specialized needs that needs to be taken care of. This is a 9.1mA device. In order for the memory chip to function properly, the voltage must not exceed 12mA. This logic device has implemented 1 channels. Several Teridian? series models have this feature included in them. The device can be supplied using 3.3V. It is possible to use this device at a frequency up to 10MHz. A memory-sized 128kB is incorporated into this PMIC. In the PMIC, FLASH memory is utilized.
78M6631-IM/F Features
3 Phase meter.
POWER SUPPLY MANAGEMENT CIRCUIT analog IC.
1 channels.
Operating maximum frequency: 10MHz.
128kB adequate size for target applications.
FLASH memory.
78M6631-IM/F Applications
There are a lot of Maxim Integrated 78M6631-IM/F Energy Metering ICs applications.
- Real-Time Measurement of Input Power for AC/DC Supplies
- Subsystem Power Measurement
- PCs/servers
- Telecom Infrastructure
- Power monitoring instruments
- Base Station Power Distribution Systems
- Central office equipment
- Power Monitoring for Home Automation
- Telecommunications and data communications equipment
- Industrial Equipment
