7SB3125DTT1G
| Parameters | |
|---|---|
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SB3125 |
| Pin Count | 5 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 100nA |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | INVERTED |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Subcategory | Bus Driver/Transceiver |
| Max Power Dissipation | 200mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
7SB3125DTT1G Overview
Digital switch is provided in the SOT-23-5 Thin, TSOT-23-5 for the purpose of saving board space.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Bus Switch is used.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Among its basic configurations are 5 terminations.You can also find related parts by using its logic switch base part number of 7SB3125.The multiplexer is supplied with 4.5V voltage.In this turn signal switch, there are 5 components that can be connected to each pin.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is used as its supply type.With 5 pins, it is configured.As a result, signal multiplexer provides 1 bits.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).It is provided that 5V has a power supply in order to function normally.This is a signal switch that is categorized as Bus Driver/Transceiver.Without external influences, it consumes 100nA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.2 ports are used for some other peripheral signal switchings to plug in.As far as the resistance is concerned, it operates with 20Ohm.Configuration elements for the mux switch consist of 1.
7SB3125DTT1G Features
Supplied in the SOT-23-5 Thin, TSOT-23-5 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7SB3125DTT1G Applications
There are a lot of ON Semiconductor 7SB3125DTT1G Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor input
- Robotic vehicles
- Enabling different functions units in microprocessor instruction decoding
- CPU memory location identification
- Code conversion
- Automatic Monitoring systems
- Data demultiplexing
- Electronics industry
- Data transfer
- To select different task for memory in microprocessor memory systems
