7SB3125MUTCG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Subcategory | Bus Driver/Transceiver |
| Max Power Dissipation | 252mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SB3125 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 100nA |
| Family | CBT/FST/QS/5C/B |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | INVERTED |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7SB3125MUTCG Overview
As a means of saving space, digital switch is provided in the 6-UFDFN.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.When digital controlled switch operates at 4V~5.5V, designers have superior flexibility.There is a design for terminating 6 as part of its basic configuration.The base part number is 7SB3125, so you can find its logic switch related parts using that number.In multiplexer's system, 4.5V is the voltage supplied.A component pin count of 6 is found on this turn signal switch.NO LEAD is used as the point at which the conductors come to an end as part of this formula.In this case, the supply type is Single.A configuration of 6 pins is used.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 1 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.In order to maintain mux switch's normal operation, power is provided to 5V.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.In the absence of external influences, it consumes 100nA current of multiplexer ic.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.A resistance of 2 governs its operation.As far as the resistance is concerned, it operates with 20Ohm.There are 1 elements used for the mux switch configuration.
7SB3125MUTCG Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7SB3125MUTCG Applications
There are a lot of ON Semiconductor 7SB3125MUTCG Signal Switches / Multiplexers / Decoders applications.
- Memory chips
- Control unit of Central Processing unit (CPU)
- Encrypted communications system
- Textile mills
- Microprocessor instruction decoding
- Data bus control
- Data collection system
- Home automation system
- Relay
- D/A converters
