Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
5-TSSOP, SC-70-5, SOT-353 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Type |
Bus Switch |
Resistance |
20Ohm |
Subcategory |
Bus Driver/Transceiver |
Max Power Dissipation |
150mW |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
7SB3126 |
Pin Count |
5 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
4.8 ns |
Quiescent Current |
100nA |
Turn On Delay Time |
4.8 ns |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Output Polarity |
INVERTED |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Length |
2mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
7SB3126DFT2G Overview
This is a relatively small item of digital switch that is included in the 5-TSSOP, SC-70-5, SOT-353 in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).Mounting is performed using Surface Mount.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.Among its basic features are 5 terminations.The base part number is 7SB3126, so you can find its logic switch related parts using that number.For multiplexer's system, a voltage of 4.5V is supplied.In this turn signal switch, there are 5 component pins.As a result, conductors end at GULL WING.Single is used as its supply type.The board is configured with 5 pins.As a result, signal multiplexer provides 1 bits.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.For mux switch's normal operation, power supply 5V is provided.The digital switch ic is a part of an electronic system classified as Bus Driver/Transceiver.In the absence of external influences, it consumes 100nA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.With a resistance of 0, it operates.The resistance of the signal switching is 20Ohm.The mux switch configuration contains 1 elements.
7SB3126DFT2G Features
Supplied in the 5-TSSOP, SC-70-5, SOT-353 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7SB3126DFT2G Applications
There are a lot of ON Semiconductor 7SB3126DFT2G Signal Switches / Multiplexers / Decoders applications.
- D/A converters
- Speed synchronization of multiple motors in industries
- Automatic Monitoring systems
- Data demultiplexing
- HD surveillance system
- Arithmetic Logic Units
- Paper plants
- Data collection system
- Transmission from the computer system of a satellite
- High-performance memory-decoding applications