Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-5 Thin, TSOT-23-5 |
Surface Mount |
YES |
Number of Pins |
5 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e3 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
5 |
Type |
Bus Switch |
Resistance |
20Ohm |
Subcategory |
Bus Driver/Transceiver |
Max Power Dissipation |
200mW |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
7SB3126 |
Pin Count |
5 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
4.8 ns |
Quiescent Current |
100nA |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Output Polarity |
INVERTED |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Length |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
7SB3126DTT1G Overview
This is a relatively small item of digital switch that is included in the SOT-23-5 Thin, TSOT-23-5 in order to save space on the board.It is packaged according to the Tape & Reel (TR) method.In terms of mounting, digital switch ic uses the method of Surface Mount.In the multiplexers, the analog IC Bus Switch is used.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.As parts of its basic configuration, 5 terminations are desgined.The base part number is 7SB3126, which can also be used to find its logic switch related parts.For multiplexer's system, a voltage of 4.5V is supplied.This turn signal switch contains 5 component pins.Conductors terminate at GULL WING in this design.In this case, the supply type is Single.This multiplexer ic is configured with 5 pins.Signal multiplexer contains 1 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.For mux switch's normal operation, power supply 5V is provided.In electronic terms, the digital switch ic is classified as Bus Driver/Transceiver.It consumes 100nA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers can be reliably maintained at a voltage of 5V.2 ports are used for some other peripheral signal switchings to plug in.20Ohm is the resistance at which it operates.In mux switch configuration, there are 1 elements.
7SB3126DTT1G Features
Supplied in the SOT-23-5 Thin, TSOT-23-5 package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7SB3126DTT1G Applications
There are a lot of ON Semiconductor 7SB3126DTT1G Signal Switches / Multiplexers / Decoders applications.
- Data transfer
- Enabling block of memory depending on address in memory chips
- Memory chips
- Medium scale TV wall
- Telephone network
- Data communication
- Seven segment displays
- A robotic vehicle with the metal detector
- Control unit of Central Processing unit (CPU)
- Recording transmission