Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
6-UFDFN |
Surface Mount |
YES |
Number of Pins |
6 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
6 |
Type |
Bus Switch |
Resistance |
20Ohm |
Subcategory |
Bus Driver/Transceiver |
Max Power Dissipation |
252mW |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Number of Functions |
1 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.4mm |
Base Part Number |
7SB3126 |
Pin Count |
6 |
Operating Supply Voltage |
5V |
Number of Elements |
1 |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Number of Bits |
1 |
Propagation Delay |
4.8 ns |
Quiescent Current |
100nA |
Family |
CBT/FST/QS/5C/B |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Output Polarity |
INVERTED |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Height Seated (Max) |
0.55mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
7SB3126MUTCG Overview
Due to the fact that it is provided in the 6-UFDFN, digital switch allows the board to be compacted.It is packaged in the way of Tape & Reel (TR).Mounting is performed using Surface Mount.the multiplexers uses an analog IC Bus Switch.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.There is a design for terminating 6 as part of its basic configuration.There is a base part number 7SB3126 that can be used to locate signal switch's related components as well.In this case, 4.5V is the voltage supplied to the multiplexer's system.A component pin count of 6 is found on this turn signal switch.In this case, Single is employed as the supply type.This multiplexer ic is configured with 6 pins.I would like to refer to the logic switch as a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 1 bits provided.Keep Vsup at 4V to avoid unnecessary failures.It is provided that 5V has a power supply in order to function normally.The part belongs to the Bus Driver/Transceiver category of signal switches.Without any external influences, it consumes 100nA current of multiplexer ic at all times.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.2 ports are used for some other peripheral signal switchings to plug in.20Ohm is the resistance at which it operates.The configuration of the mux switch contains 1 elements.
7SB3126MUTCG Features
Supplied in the 6-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7SB3126MUTCG Applications
There are a lot of ON Semiconductor 7SB3126MUTCG Signal Switches / Multiplexers / Decoders applications.
- Analog, digital or video signal switching
- Electronics industry
- Telephone network
- Small scale TV wall
- Speed synchronization of multiple motors in industries
- Data demultiplexing
- Automation system
- Steel plants
- Microprocessor instruction decoding
- Combinational circuit