7SB3257DFT2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 6-TSSOP, SC-88, SOT-363 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 20Ohm |
| Max Power Dissipation | 252mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SB3257 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Number of Bits | 2 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 100nA |
| Logic Function | Demultiplexer, Multiplexer |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 4.6ns |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7SB3257DFT2G Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 6-TSSOP, SC-88, SOT-363.Tape & Reel (TR) is the method used for packaging.The method digital switch ic adopts for mounting is Surface Mount.the multiplexers uses IC Multiplexer/Demultiplexer as the analog IC.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.There are 6 terminations included in its basic configuration.As its base part number is 7SB3257, logic switch can also be used to find its related parts.The multiplexer's system is powered by 4.5V voltage.Signal switch has 5 component pins.As a result, conductors end at GULL WING.In this case, Single is employed as the supply type.There are 5 pins on it.In this signal multiplexer, there are 2 bits that are provided.To avoid unnecessary failures, keep the supply voltage at 4V (Vsup).No external influence consumes 100nA current of multiplexer ic.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.It operates with a resistance of 20Ohm.The turn signal switch's circuit consists of 2 channels that are being used for transmission in the circuit.
7SB3257DFT2G Features
Supplied in the 6-TSSOP, SC-88, SOT-363 package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7SB3257DFT2G Applications
There are a lot of ON Semiconductor 7SB3257DFT2G Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- Solenoid cooling fan
- Recording transmission
- Make half adder
- Data transfer
- Electronically controlled engine system
- Control unit of Central Processing unit (CPU)
- Make full adder
- Enabling different rows of memory depending on address in memory chips
- Telephone network
