7SB3257DTT1G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 19.986414mg |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Type | Multiplexer/Demultiplexer |
| Resistance | 20Ohm |
| Max Power Dissipation | 200mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7SB3257 |
| Pin Count | 5 |
| JESD-30 Code | R-PDSO-G6 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Circuit | 1 x 2:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Channels | 2 |
| Number of Bits | 2 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 100nA |
| Logic Function | Demultiplexer, Multiplexer |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Independent Circuits | 1 |
| Switch-on Time-Max | 4.6ns |
| Drain to Source Resistance | 7Ohm |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7SB3257DTT1G Overview
This is a relatively small item of digital switch that is included in the SOT-23-6 Thin, TSOT-23-6 in order to save space on the board.It is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Multiplexer/Demultiplexer.The operating temperature of -55°C~125°C will not be susceptible to external factors.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.Its basic configuration includes terminations in the 6 range.To find signal switch's related components, a base part number of 7SB3257 may also be used.The multiplexer's system works with 4.5V voltage.In this turn signal switch, there are 5 component pins.It is the end of conductors that is represented by GULL WING.Single is employed as its supply type.This multiplexer ic has 5 pins configured.As a result, signal multiplexer provides 2 bits.Vsup should be kept at 4V to prevent some unnecessary failures.There are no external influences on this multiplexer ic, so it consumes 100nA current.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.This signal switching operates at a resistance of 20Ohm.Transmission is carried out over 2 channels in the turn signal switch's circuit.
7SB3257DTT1G Features
Supplied in the SOT-23-6 Thin, TSOT-23-6 package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7SB3257DTT1G Applications
There are a lot of ON Semiconductor 7SB3257DTT1G Signal Switches / Multiplexers / Decoders applications.
- Microprocessor instruction decoding
- High-performance memory systems
- Data communication
- Medical industry
- Arithmetic Logic Units
- Time division multiplexing system
- GLAN
- Image transmission
- Code conversion
- Data-routing applications
