7SB385AMX1TCG
| Parameters | |
|---|---|
| Number of Pins | 6 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 252mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7SB385 |
| Pin Count | 6 |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 4.8 ns |
| Quiescent Current | 100nA |
| Family | CBT/FST/QS/5C/B |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | INVERTED |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 6-XFLGA |
| Surface Mount | YES |
7SB385AMX1TCG Overview
In order to save board space, digital switch is located in the 6-XFLGA.The package is in the form of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .As the analog part, the circuit uses an analog IC Bus Switch.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.There are 6 terminations included in its basic configuration.You can also find related parts by using its logic switch base part number of 7SB385.The multiplexer is supplied with 4.5V voltage.Signal switch has 6 component pins.Single is employed as its supply type.There are 6 pins on it.The logic switch is included into the family of CBT/FST/QS/5C/B.Signal multiplexer provides 1 bits.Vsup should be kept at 4V to prevent some unnecessary failures.Despite not interacting with external factors, it consumes 100nA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.The resistance is 2.The system operates with a resistance of 20Ohm.The mux switch configuration consists of 1 elements.
7SB385AMX1TCG Features
Supplied in the 6-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7SB385AMX1TCG Applications
There are a lot of ON Semiconductor 7SB385AMX1TCG Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- To select different devices in microprocessor input
- PCIe
- Logic gates for other digital devices
- Encrypted communications system
- Paper plants
- Make half adder
- High-performance memory-decoding applications
- Medical industry
- Analog, digital or video signal switching
