7WB3125BMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 7Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 7WB3125 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 100nA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.6mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WB3125BMX1TCG Overview
In order to save board space, digital switch is located in the 8-XFLGA.It is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.The operating temperature of -55°C~125°C will not be susceptible to external factors.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.There is a design for terminating 8 as part of its basic configuration.There is a base part number 7WB3125 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 4.5V volts.This turn signal switch has 8 component pins.Single is used as its supply type.There are 8 pins on it.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer provides 1 bits.Keep Vsup at 4V to avoid unnecessary failures.In the absence of external influences, it consumes 100nA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.As far as the resistance is concerned, it operates with 7Ohm.In the mux switch configuration, there are 2 elements.
7WB3125BMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WB3125BMX1TCG Applications
There are a lot of ON Semiconductor 7WB3125BMX1TCG Signal Switches / Multiplexers / Decoders applications.
- GLAN
- Idle motor
- To select different devices in microprocessor output
- Textile mills
- Encrypted communications system
- RF-based home automation system
- Arithmetic Logic Units
- Data distribution
- Medium scale TV wall
- To select different devices in microprocessor input
