7WB3125CMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 7WB3125 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WB3125CMX1TCG Overview
Due to the lack of space on the board, digital switch is provided in the 8-XFLGA.In this case, it is packaged as Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses IC Bus Switch as the analog IC.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.Its basic configuration includes terminations in the 8 range.In addition, it also has a base part number of 7WB3125, which can be used to find related parts.In multiplexer's system, 4.5V is the voltage supplied.A component pin count of 8 is found on this turn signal switch.This supply type employs Single.Currently, it is configured with a 8 pin configuration.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 1 bits.Vsup should be kept at 4V to prevent some unnecessary failures.There are no external influences on this multiplexer ic, so it consumes 100nA current.The performance of the multiplexers can be reliably maintained at a voltage of 5V.2 is the resistance at which it operates.20Ohm is the resistance at which it operates.A configuration element for the mux switch consists of 2 elements.
7WB3125CMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WB3125CMX1TCG Applications
There are a lot of ON Semiconductor 7WB3125CMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Time division multiplexing system
- Medical industry
- PCIe
- Electronics industry
- Enabling block of memory depending on address in memory chips
- Memory chips
- Relay
- Metal detectors
- Encrypted communications system
