7WB3126AMX1TCG
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WB3126 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.95mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
7WB3126AMX1TCG Overview
Providing this information in the 8-XFLGA enables digital switch board space to be saved.Tape & Reel (TR) represents its packaging.Digital switch ic adheres to a mounting method of Surface Mount.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.Among its basic configurations are 8 terminations.You can also find related parts by using its logic switch base part number of 7WB3126.In this case, 4.5V is the voltage supplied to the multiplexer's system.A component pin count of 8 is found on this turn signal switch.There is a type of supply of Single.Currently, it is configured with a 8 pin configuration.The logic switch is a member of the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 1 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.In the absence of external influences, it consumes 100nA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.2 is the resistance at which it operates.20Ohm is the resistance at which it operates.The mux switch configuration contains 2 elements.
7WB3126AMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WB3126AMX1TCG Applications
There are a lot of ON Semiconductor 7WB3126AMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Relay
- Enabling block of memory depending on address in memory chips
- Textile mills
- Electronic circuits
- Audio transmission
- Decimal decoder
- Solenoid cooling fan
- Data distribution
- Computer memory
- Transmission from the computer system of a satellite
