7WB3126CMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 7WB3126 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WB3126CMX1TCG Overview
In order to save board space, digital switch is located in the 8-XFLGA.The package is packaged in the manner of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.A digital IC Bus Switch is used as the analog component of the multiplexers.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.The basic configuration includes 8 terminations.The base part number is 7WB3126, which can also be used to find its logic switch related parts.The multiplexer's system works with 4.5V voltage.In this turn signal switch, there are 8 components that can be connected to each pin.There is a type of supply Single that is employed in this case.This multiplexer ic has 8 pins configured.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer provides 1 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.It consumes 100nA current of multiplexer ic since it is not affected by external factors.The performance of the multiplexers of a system can be reliably achieved with a supply voltage of 5V.With a resistance of 0, it operates.A resistance of 20Ohm is used to operate the signal switching.The mux switch configuration contains 2 elements.
7WB3126CMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WB3126CMX1TCG Applications
There are a lot of ON Semiconductor 7WB3126CMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Computer memory
- Small scale TV wall
- Code converters
- To select different devices in microprocessor output
- Decimal decoder
- Memory chips
- Signal router
- Control unit of Central Processing unit (CPU)
- Time division multiplexing system
- Enabling block of memory depending on address in memory chips
