banner_page

7WB3126MUTAG

8 Terminations4V~5.5V 8 Pin 7WB3126 Signal switch2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-7WB3126MUTAG
  • Package: 8-UFDFN
  • Datasheet: PDF
  • Stock: 372
  • Description: 8 Terminations4V~5.5V 8 Pin 7WB3126 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 2 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-UFDFN
Surface Mount YES
Number of Pins 8
Weight 9.49709mg
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Bus Switch
Resistance 20Ohm
Subcategory Bus Driver/Transceivers
Max Power Dissipation 1.127W
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 4.5V
Terminal Pitch 0.4mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 7WB3126
Pin Count 8
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Elements 2
Circuit 1 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Number of Bits 1
Propagation Delay 4.8 ns
Quiescent Current 100nA
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height Seated (Max) 0.55mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

7WB3126MUTAG Overview


Due to the fact that it is provided in the 8-UFDFN, digital switch allows the board to be compacted.Tape & Reel (TR) represents its packaging.In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.Among its basic configurations are 8 terminations.There is a base part number of 7WB3126 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is supplied with a voltage of 4.5V.A component pin count of 8 can be found on this turn signal switch.It is the end of conductors that is represented by NO LEAD.Single is employed as its supply type.A total of 8 pins are configured on this board.The logic switch is a member of the CBT/FST/QS/5C/B family.As a result, signal multiplexer provides a total of 1 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.For mux switch's normal operation, there is a power supply provided at 5V.In electronic terms, the digital switch ic is classified as Bus Driver/Transceivers.In the absence of external influences, it consumes 100nA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.2 ports are used for some other peripheral signal switchings to plug in.This signal switching operates at a resistance of 20Ohm.This mux switch configuration has 2 elements.

7WB3126MUTAG Features


Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

7WB3126MUTAG Applications


There are a lot of ON Semiconductor 7WB3126MUTAG Signal Switches / Multiplexers / Decoders applications.

  • HDMI applications
  • Enabling different functions units in microprocessor instruction decoding
  • Solenoid cooling fan
  • Relay
  • Speed synchronization of multiple motors in industries
  • Data bus control
  • Communication system
  • Idle motor
  • To select different devices in microprocessor input
  • Data communication

Write a review

Note: HTML is not translated!
    Bad           Good