banner_page

7WB3305MUTAG

8 Terminations4V~5.5V 8 Pin 7WB3305 Signal switch2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-7WB3305MUTAG
  • Package: 8-UFDFN
  • Datasheet: PDF
  • Stock: 437
  • Description: 8 Terminations4V~5.5V 8 Pin 7WB3305 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 3 hours ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-UFDFN
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Bus Switch
Resistance 20Ohm
Subcategory Bus Driver/Transceivers
Max Power Dissipation 1.127W
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Number of Functions 2
Supply Voltage 4.5V
Terminal Pitch 0.4mm
Base Part Number 7WB3305
Pin Count 8
Operating Supply Voltage 5V
Number of Elements 2
Circuit 1 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Number of Bits 1
Propagation Delay 250 ps
Quiescent Current 100nA
Turn On Delay Time 4.8 ns
Family CBT/FST/QS/5C/B
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height Seated (Max) 0.55mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

7WB3305MUTAG Overview


In order to conserve board space, digital switch is included in the 8-UFDFN.Tape & Reel (TR) is the method used for packaging.Surface Mount is the mounting method digital switch ic uses.the multiplexers uses IC Bus Switch as the analog IC.In the case of -55°C~125°C, turn signal switch will not be affected by external factors.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.It is designed with 8 terminations as part of its basic configuration.You can also find related parts by using its logic switch base part number of 7WB3305.The multiplexer's system is powered by 4.5V volts.This turn signal switch consists of 8 component pins.As a type of supply, Single is employed.This multiplexer ic has 8 pins configured.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer contains 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.A power supply is provided for mux switch's normal operation of 5V.Bus Driver/Transceivers is a category for the digital switch ics.Not being affected by the external factors, consumes 100nA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 governs its operation.This signal switching operates at a resistance of 20Ohm.The configuration of the mux switch contains 2 elements.

7WB3305MUTAG Features


Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

7WB3305MUTAG Applications


There are a lot of ON Semiconductor 7WB3305MUTAG Signal Switches / Multiplexers / Decoders applications.

  • Medium scale TV wall
  • A robotic vehicle with the metal detector
  • Recording transmission
  • High-performance memory-decoding applications
  • CPU memory location identification
  • Microprocessor input/output systems
  • Data-routing applications
  • PCIe
  • LVDS
  • Decimal decoder

Write a review

Note: HTML is not translated!
    Bad           Good