7WB3306BMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 7WB3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 4.8 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.6mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WB3306BMX1TCG Overview
This is a relatively small item of digital switch that is included in the 8-XFLGA in order to save space on the board.The package is in the form of Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.There is a design for terminating 8 as part of its basic configuration.There is a base part number of 7WB3306 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system works with 4.5V voltage.A component pin count of 8 is found on this turn signal switch.At the end of a conductor, it uses BUTT as the point where the conductor ends.Its supply type is Single, which is used as the source of power.Currently, it is configured with a 8 pin configuration.Signal multiplexer contains 2 bits.Keeping Vsup at 4V will prevent some unwanted failures.In the absence of external influences, it consumes 100nA current of multiplexer ic.The performance of the multiplexers can be reliably maintained at a voltage of 5V.As far as the resistance is concerned, it operates with 2.A resistance of 20Ohm is used to operate the signal switching.This mux switch configuration has 2 elements.
7WB3306BMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WB3306BMX1TCG Applications
There are a lot of ON Semiconductor 7WB3306BMX1TCG Signal Switches / Multiplexers / Decoders applications.
- To select different task for memory in microprocessor memory systems
- Enabling different rows of memory depending on address in memory chips
- Memory system of computers
- Robotic vehicles
- Memory chips
- Microprocessor input/output systems
- Make full adder
- Automatic health monitoring systems
- Injectors
- HD surveillance system
