banner_page

7WB3306CMX1TCG

8 Terminations4V~5.5V 8 Pin 7WB3306 Signal switch1 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-7WB3306CMX1TCG
  • Package: 8-XFLGA
  • Datasheet: PDF
  • Stock: 347
  • Description: 8 Terminations4V~5.5V 8 Pin 7WB3306 Signal switch1 Functions(Kg)

Details

Tags

Parameters
Mounting Type Surface Mount
Package / Case 8-XFLGA
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2014
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Bus Switch
Resistance 20Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 274mW
Voltage - Supply 4V~5.5V
Terminal Position BOTTOM
Terminal Form BUTT
Number of Functions 1
Supply Voltage 4.5V
Terminal Pitch 0.35mm
Base Part Number 7WB3306
Pin Count 8
Operating Supply Voltage 5V
Number of Elements 2
Circuit 1 x 1:1
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Number of Bits 2
Propagation Delay 250 ps
Quiescent Current 100nA
Turn On Delay Time 4.8 ns
Halogen Free Halogen Free
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height Seated (Max) 0.4mm
Length 1.45mm
Width 1mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free

7WB3306CMX1TCG Overview


This is a relatively small item of digital switch that is included in the 8-XFLGA in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.As the analog part, the circuit uses an analog IC Bus Switch.When the operating temperature is kept at -55°C~125°C, turn signal switch will not be susceptible to external factors.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sThis configuration includes 8 terminations as part of its basic functionality.To find signal switch's related components, a base part number of 7WB3306 may also be used.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemThis turn signal switch consists of 8 component pins.It is the end of conductors that is represented by BUTT.In this case, Single is employed as the supply type.There are 8 pins on it.Signal multiplexer contains 2 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.No external influence consumes 100nA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.In terms of resistance, it has a value of 20Ohm.In mux switch configuration, there are 2 elements.

7WB3306CMX1TCG Features


Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V

7WB3306CMX1TCG Applications


There are a lot of ON Semiconductor 7WB3306CMX1TCG Signal Switches / Multiplexers / Decoders applications.

  • GLAN
  • Memory system of computers
  • Logic gates for other digital devices
  • Make full adder
  • Steel plants
  • Electronics industry
  • Decimal decoder
  • Injectors
  • Transmission from the computer system of a satellite
  • Make half adder

Write a review

Note: HTML is not translated!
    Bad           Good