7WB3306DTR2G
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2012 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 833mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | 7WB3306 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 1μA |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 4.8 ns |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Length | 4.4mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WB3306DTR2G Overview
Due to the lack of space on the board, digital switch is provided in the 8-TSSOP (0.173, 4.40mm Width).Tape & Reel (TR) represents its packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.If the operating temperature is maintained at -55°C~125°C, turn signal switch will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.Its basic configuration includes terminations in the 8 range.The base part number is 7WB3306, so you can find its logic switch related parts using that number.For multiplexer's system, 4.5V voltage is supplied.This turn signal switch has 8 component pins.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.The supply type of this multiplexer ic is Single.This multiplexer ic has 8 pins configured.As a result, signal multiplexer provides 2 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.During mux switch's normal operation, 5V is provided with a power supply.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.Without any external influences, it consumes 100nA current of multiplexer ic at all times.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.The resistance is 2.In terms of resistance, it has a value of 20Ohm.The mux switch configuration contains 2 elements.
7WB3306DTR2G Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WB3306DTR2G Applications
There are a lot of ON Semiconductor 7WB3306DTR2G Signal Switches / Multiplexers / Decoders applications.
- Time division multiplexing system
- Data communication
- Electronics industry
- Microprocessor instruction decoding
- Data transfer
- HD surveillance system
- Implementing boolean functions with multiple variables
- Small scale TV wall
- Frequency multiplexing system
- Arithmetic Logic Units
