7WB3306MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 20Ohm |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 1.127W |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WB3306 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 100nA |
| Turn On Delay Time | 4.8 ns |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WB3306MUTAG Overview
Due to the lack of space on the board, digital switch is provided in the 8-UFDFN.In this case, it is packaged as Tape & Reel (TR).The method digital switch ic adopts for mounting is Surface Mount.Bus Switch is the analog IC that the multiplexers uses.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.As parts of its basic configuration, 8 terminations are desgined.In addition, it also has a base part number of 7WB3306, which can be used to find related parts.For multiplexer's system, a voltage of 4.5V is supplied.This turn signal switch has a total of 8 component pins.As a result, conductors end at NO LEAD.In this case, the supply type is Single.Currently, it is configured with a 8 pin configuration.In the signal multiplexer, there are 2 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.For mux switch's normal operation, power supply 5V is provided.This is a signal switch that is categorized as Bus Driver/Transceivers.In the absence of external influences, it consumes 100nA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.The signal switching operates with a resistance of 2.In terms of resistance, it has a value of 20Ohm.It contains 2 elements in mux switch configuration.
7WB3306MUTAG Features
Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WB3306MUTAG Applications
There are a lot of ON Semiconductor 7WB3306MUTAG Signal Switches / Multiplexers / Decoders applications.
- HDMI applications
- RF-based home automation system
- Memory chips
- Logic circuits
- Time division multiplexing system
- HD surveillance system
- Combinational circuit
- Enabling different rows of memory depending on address in memory chips
- Recording transmission
- War field flying robot with a night vision flying camera
