7WBD3125AMUTCG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 601mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7WBD3125 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.6mm |
| Length | 1.6mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WBD3125AMUTCG Overview
Providing this information in the 8-UFQFN enables digital switch board space to be saved.Tape & Reel (TR) is the method used for packaging.As far as mounting is concerned, digital switch ic uses Surface Mount.The analog IC used in the multiplexers can be referred to as Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.The basic configuration of this system includes 8 terminations.You can also find related parts by using its logic switch base part number of 7WBD3125.The multiplexer's system is powered by 4.5V voltage.A component pin count of 8 can be found on this turn signal switch.NO LEAD represents the end of conductors.As a type of supply, Single is employed.Currently, it is configured with 8 pins.The logic switch belongs to the family of CBT/FST/QS/5C/B.Signal multiplexer consists of 1 bits.Vsup should be kept at 4V to prevent some unnecessary failures.During mux switch's normal operation, 5V is provided with a power supply.The part belongs to the Bus Driver/Transceivers category of signal switches.Despite not interacting with external factors, it consumes 1mA current of multiplexer ic.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.The signal switching operates with a resistance of 2.The resistance of the signal switching is 70Ohm.In mux switch configuration, there are 2 elements.
7WBD3125AMUTCG Features
Supplied in the 8-UFQFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3125AMUTCG Applications
There are a lot of ON Semiconductor 7WBD3125AMUTCG Signal Switches / Multiplexers / Decoders applications.
- LVDS
- Frequency multiplexing system
- Textile mills
- HDMI applications
- GLAN
- Data demultiplexing
- Solenoid cooling fan
- Logic gates for other digital devices
- Small scale TV wall
- Telephone network
