7WBD3125AMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3125 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.95mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WBD3125AMX1TCG Overview
Due to the fact that it is provided in the 8-XFLGA, digital switch allows the board to be compacted.The package is in the form of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.There is a design for terminating 8 as part of its basic configuration.There is a base part number of 7WBD3125 which can also be used in order to locate the logic switch that are related to this item.For multiplexer's system, a voltage of 4.5V is supplied.A component pin count of 8 is found on this turn signal switch.Using the point BUTT as an end point of conductors, it is used to determine the terminus of a conductor.This supply type employs Single.Currently, it is configured with a 8 pin configuration.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 1 bits signal multiplexer provides.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.No external influence consumes 1mA current of multiplexer ic.Supply voltages of 5V can provide reliable performance of the multiplexers.The resistance of the signal switching is 2.70Ohm is the resistance at which it operates.The configuration of the mux switch contains 2 elements.
7WBD3125AMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3125AMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3125AMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Data-routing applications
- Home automation system
- Code conversion
- GLAN
- HD surveillance system
- Analog, digital or video signal switching
- Speed synchronization of multiple motors in industries
- Communication system
- Textile mills
- Steel plants
