7WBD3125CMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 7WBD3125 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WBD3125CMX1TCG Overview
In order to conserve board space, digital switch is included in the 8-XFLGA.In this case, it is packaged as Tape & Reel (TR).In terms of mounting, digital switch ic uses the method of Surface Mount.the multiplexers uses an analog IC Bus Switch.The operating temperature of -55°C~125°C will not be susceptible to external factors.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.Among its basic configurations are 8 terminations.Its logic switch base part number is 7WBD3125 which can also be used to find its logic switch related parts.In multiplexer's system, 4.5V is the voltage supplied.This turn signal switch has a total of 8 component pins.At the end of a conductor, it uses BUTT as the point where the conductor ends.In this case, the supply type is Single.There are 8 pins on it.There is a family of CBT/FST/QS/5C/B members.In this signal multiplexer, there are 1 bits provided.It is recommended that the minimum supply voltage (Vsup) be kept at 4V to avoid some unnecessary failures.It consumes 1mA current of multiplexer ic since it is not affected by external factors.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.With a resistance of 0, it operates.With a resistance of 70Ohm, it operates.Configuration elements for the mux switch consist of 2.
7WBD3125CMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3125CMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3125CMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Automatic health monitoring systems
- Memory system of computers
- Metal detectors
- Enabling different rows of memory depending on address in memory chips
- Frequency multiplexing system
- Robotic vehicles
- A/D converters
- Image transmission
- Seven segment displays
- Analog, digital or video signal switching
