7WBD3125MUTAG
| Parameters | |
|---|---|
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3125 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 1.127W |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
7WBD3125MUTAG Overview
Providing this information in the 8-UFDFN enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.The mounting method digital switch ic uses is Surface Mount.A digital IC Bus Switch is used as the analog component of the multiplexers.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.A supply voltage of 4V~5.5V provides digital controlled switch's superior flexibility for designers.The basic configuration includes 8 terminations.To find signal switch's related components, a base part number of 7WBD3125 may also be used.The multiplexer's system works with 4.5V voltage.A component pin count of 8 can be found on this turn signal switch.At the end of a conductor, it uses NO LEAD as the point where the conductor ends.There is a supply type of Single employed as part of this supply.A total of 8 pins are configured on this board.The logic switch is a member of the CBT/FST/QS/5C/B family.In this signal multiplexer, there are 1 bits that are provided.Vsup should be kept at 4V to prevent some unnecessary failures.It is provided that 5V has a power supply in order to function normally.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.Despite not interacting with external factors, it consumes 1mA current of multiplexer ic.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.A resistance of 2 is used to operate the signal switching.With a resistance of 70Ohm, it operates.A configuration element for the mux switch consists of 2 elements.
7WBD3125MUTAG Features
Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3125MUTAG Applications
There are a lot of ON Semiconductor 7WBD3125MUTAG Signal Switches / Multiplexers / Decoders applications.
- Audio transmission
- Code converters
- Electronically controlled engine system
- Speed synchronization of multiple motors in industries
- Microprocessor input/output systems
- Time division multiplexing system
- Memory system of computers
- Enabling different functions units in microprocessor instruction decoding
- Data transfer
- Enabling different rows of memory depending on address in memory chips
