7WBD3125USG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 498mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3125 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Nominal Supply Current | 100nA |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WBD3125USG Overview
The reason it is provided is that the board space can be saved by placing digital switch in the 8-VFSOP (0.091, 2.30mm Width).As a result, it is packaged in a way that is referred to as Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.The multiplexers uses an analog IC Bus Switch as the analog part of the circuit.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.The basic configuration includes 8 terminations.The base part number is 7WBD3125, which is also useful when looking up signal switch's related components.In multiplexer's system, 4.5V is the voltage supplied.A component pin count of 8 is found on this turn signal switch.GULL WING is used as the point at which the conductors come to an end as part of this formula.As a type of supply, Single is employed.A configuration of 8 pins is used.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 1 bits in signal multiplexer.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.For mux switch's normal operation, power supply 5V is provided.This is a signal switch that is categorized as Bus Driver/Transceivers.Despite not interacting with external factors, it consumes 1mA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.With a resistance of 70Ohm, it operates.Configuration elements for the mux switch consist of 2.
7WBD3125USG Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3125USG Applications
There are a lot of ON Semiconductor 7WBD3125USG Signal Switches / Multiplexers / Decoders applications.
- Medium scale TV wall
- Data demultiplexing
- High-performance memory-decoding applications
- Data collection system
- Electronics industry
- Data communication
- Signal router
- A/D converters
- LVDS
- HDMI applications
