Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 weeks ago) |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
8-UFDFN |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
70Ohm |
Terminal Finish |
Nickel/Gold/Palladium (Ni/Au/Pd) |
Subcategory |
Bus Driver/Transceivers |
Max Power Dissipation |
601mW |
Voltage - Supply |
4V~5.5V |
Terminal Position |
BOTTOM |
Terminal Form |
NO LEAD |
Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
Number of Functions |
2 |
Supply Voltage |
4.5V |
Terminal Pitch |
0.5mm |
Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
Base Part Number |
7WBD3126 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Number of Bits |
2 |
Propagation Delay |
250 ps |
Quiescent Current |
1mA |
Turn On Delay Time |
4.8 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Height Seated (Max) |
0.6mm |
Length |
1.6mm |
Width |
1.6mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
7WBD3126AMUTCG Overview
Due to the fact that it is provided in the 8-UFDFN, digital switch allows the board to be compacted.In this case, it is packaged as Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.As the analog part, the circuit uses an analog IC Bus Switch.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.Using a 4V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.This configuration includes 8 terminations as part of its basic functionality.The base part number is 7WBD3126, which can also be used to find its logic switch related parts.In multiplexer's system, 4.5V is the voltage supplied.There are 8 component pins in this turn signal switch.At the end of a conductor, it uses NO LEAD as the point where the conductor ends.This supply type employs Single.The board has 8 pins configured.The logic switch is a member of the family of CBT/FST/QS/5C/B.In the signal multiplexer, there are 2 bits available.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 4V.The power supply of 5V is provided for mux switch's normal operation.I would classify the digital switch ic as an electronic part belonging to the Bus Driver/Transceivers category.It consumes 1mA current of multiplexer ic since it is not affected by external factors.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The resistance of the signal switching is 2.This signal switching operates at a resistance of 70Ohm.In the mux switch configuration, there are 2 elements.
7WBD3126AMUTCG Features
Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3126AMUTCG Applications
There are a lot of ON Semiconductor 7WBD3126AMUTCG Signal Switches / Multiplexers / Decoders applications.
- Make full adder
- Microprocessor memory systems
- Arithmetic Logic Units
- Automatic Monitoring systems
- Video transmission
- Time division multiplexing system
- Control unit of Central Processing unit (CPU)
- RF-based home automation system
- Logic gates for other digital devices
- Enabling different rows of memory depending on address in memory chips