7WBD3126AMX1TCG
| Parameters | |
|---|---|
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3126 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.95mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
7WBD3126AMX1TCG Overview
Digital switch is provided in the 8-XFLGA for the purpose of saving board space.It is packaged according to the Tape & Reel (TR) method.Surface Mount is the mounting method digital switch ic uses.In the multiplexers, the analog IC is indicated by Bus Switch.When the operating temperature is kept at -55°C~125°C, the machine will not be sensturn signal switchive to external influences.It provides digital controlled switch's superior flexibility for designers to use when it operates with a supply voltage of 4V~5.5V.provides digital controlled switch's digital controlled switch'sThere is a design for terminating 8 as part of its basic configuration.There is a base part number of 7WBD3126 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 4.5V voltage.This turn signal switch consists of 8 component pins.At the end of a conductor, it uses BUTT as the point where the conductor ends.Single is used as its supply type.It is configured with 8 pins.The CBT/FST/QS/5C/B family includes the logic switch.Signal multiplexer contains 2 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.Not being affected by the external factors, consumes 1mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.2 ports are used for some other peripheral signal switchings to plug in.As far as the resistance is concerned, it operates with 70Ohm.In the mux switch configuration, there are 2 elements.
7WBD3126AMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3126AMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3126AMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Robotic vehicles
- Injectors
- Automatic Monitoring systems
- Data communication
- A robotic vehicle with the metal detector
- VGA
- Make full adder
- LVDS
- Small scale TV wall
- Combinational circuit
