7WBD3126BMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.4mm |
| Base Part Number | 7WBD3126 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.6mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WBD3126BMX1TCG Overview
Due to the lack of space on the board, digital switch is provided in the 8-XFLGA.The package is packaged in the manner of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .In the multiplexers, the analog IC is indicated by Bus Switch.Turn signal switch will not be susceptible to the external factors when the operating temperature is kept at -55°C~125°C.Designers have greater flexibility when digital controlled switch operates at a 4V~5.5V supply voltage.Its basic configuration includes terminations in the 8 range.The base part number is 7WBD3126, which can also be used to find its logic switch related parts.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemSignal switch has 8 component pins.Using the point BUTT as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.This multiplexer ic is configured with 8 pins.The logic switch is a member of the CBT/FST/QS/5C/B family.Signal multiplexer consists of 2 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.In the absence of external influences, it consumes 1mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.2 is the resistance at which it operates.The resistance of the signal switching is 70Ohm.The configuration of the mux switch contains 2 elements.
7WBD3126BMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3126BMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3126BMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- To select different devices in microprocessor output
- Code conversion
- Audio transmission
- CPU memory location identification
- Idle motor
- Data communication
- To select different task for memory in microprocessor memory systems
- Time division multiplexing system
- Relay
