banner_page

7WBD3126CMX1TCG

8 Terminations4V~5.5V 8 Pin 7WBD3126 Signal switch2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-7WBD3126CMX1TCG
  • Package: 8-XFLGA
  • Datasheet: PDF
  • Stock: 633
  • Description: 8 Terminations4V~5.5V 8 Pin 7WBD3126 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Voltage - Supply 4V~5.5V
Terminal Position BOTTOM
Terminal Form BUTT
Number of Functions 2
Supply Voltage 4.5V
Terminal Pitch 0.35mm
Base Part Number 7WBD3126
Pin Count 8
Operating Supply Voltage 5V
Number of Elements 2
Circuit 1 x 1:1
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Number of Bits 2
Propagation Delay 250 ps
Quiescent Current 1mA
Turn On Delay Time 4.8 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Halogen Free Halogen Free
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height Seated (Max) 0.4mm
Length 1.45mm
Width 1mm
Radiation Hardening No
RoHS Status RoHS Compliant
Lead Free Lead Free
Mounting Type Surface Mount
Package / Case 8-XFLGA
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2014
JESD-609 Code e4
Part Status Obsolete
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Bus Switch
Resistance 70Ohm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Power Dissipation 274mW

7WBD3126CMX1TCG Overview


It is included in the 8-XFLGA in order to save board space.The package is in the form of Tape & Reel (TR).digital switch ic uses the method of Surface Mount for mounting.In the multiplexers, the analog IC Bus Switch is used.The operating temperature will not be affected by external factors when turn signal switch is set to -55°C~125°C.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.There is a design for terminating 8 as part of its basic configuration.In addition, it also has a base part number of 7WBD3126, which can be used to find related parts.The multiplexer is supplied with 4.5V voltage.A component pin count of 8 can be found on this turn signal switch.Conductors terminate at BUTT in this design.Single is used as its supply type.This multiplexer ic is configured with 8 pins.There is a family of CBT/FST/QS/5C/B members.The multiplexer ic provides 2 bits.Keep Vsup at 4V to avoid unnecessary failures.In the absence of external influences, it consumes 1mA current of multiplexer ic.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.As far as the resistance is concerned, it operates with 2.A resistance of 70Ohm is used to operate it.This mux switch configuration has 2 elements.

7WBD3126CMX1TCG Features


Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V

7WBD3126CMX1TCG Applications


There are a lot of ON Semiconductor 7WBD3126CMX1TCG Signal Switches / Multiplexers / Decoders applications.

  • PCIe
  • Code converters
  • Time division multiplexing system
  • Analog to digital conversion
  • HD surveillance system
  • Implementing boolean functions with multiple variables
  • Automatic Monitoring systems
  • Electronics industry
  • Frequency multiplexing system
  • Speed control of medern motors

Write a review

Note: HTML is not translated!
    Bad           Good