7WBD3126MUTAG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFDFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 1.127W |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.4mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3126 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 2 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.55mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WBD3126MUTAG Overview
This is a relatively small item of digital switch that is included in the 8-UFDFN in order to save space on the board.The package is packaged in the manner of Tape & Reel (TR).Mounting is performed using Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.There are 8 terminations included in its basic configuration.There is a base part number of 7WBD3126 which can also be used in order to locate the logic switch that are related to this item.The multiplexer's system is powered by 4.5V voltage.There are 8 component pins in this turn signal switch.Using the point NO LEAD as an end point of conductors, it is used to determine the terminus of a conductor.Its supply type is Single, which is used as the source of power.It is configured with 8 pins.The logic switch is included into the family of CBT/FST/QS/5C/B.As a result, signal multiplexer provides a total of 2 bits.Keeping the minimum supply voltage (Vsup) at 4V prevents some unnecessary failures.Normally, 5V is powered by a battery.The part belongs to the Bus Driver/Transceivers category of signal switches.In the absence of external influences, it consumes 1mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.The signal switching operates with a resistance of 2.This signal switching operates at a resistance of 70Ohm.In mux switch configuration, there are 2 elements.
7WBD3126MUTAG Features
Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3126MUTAG Applications
There are a lot of ON Semiconductor 7WBD3126MUTAG Signal Switches / Multiplexers / Decoders applications.
- Microprocessor input/output systems
- Decimal decoder
- Electronically controlled engine system
- Medium scale TV wall
- PCIe
- Transmission from the computer system of a satellite
- Medical industry
- Memory chips
- RF-based home automation system
- Implementing boolean functions with multiple variables
