7WBD3305AMUTCG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-UFQFN |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 601mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | 7WBD3305 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.6mm |
| Length | 1.6mm |
| Width | 1.6mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WBD3305AMUTCG Overview
Providing this information in the 8-UFQFN enables digital switch board space to be saved.The package is packaged in accordance with Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.Bus Switch is the analog IC that the multiplexers uses.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.Among its basic features are 8 terminations.You can also find related parts by using its logic switch base part number of 7WBD3305.The multiplexer's system is powered by 4.5V volts.This turn signal switch consists of 8 component pins.It is the end of conductors that is represented by NO LEAD.There is a type of supply Single that is employed in this case.This multiplexer ic has 8 pins configured.The CBT/FST/QS/5C/B family includes the logic switch.In the signal multiplexer, there are 1 bits available.It is recommended that the minimum supply voltage (Vsup) be kept at 4V so that unnecessary failures can be prevented.For mux switch's normal operation, there is a power supply provided at 5V.Bus Driver/Transceivers is the classification for this the digital switch ic.It consumes 1mA current of multiplexer ic since it is not affected by external factors.Providing a supply voltage of 5V can provide reliable performance of the multiplexers.A resistance of 2 governs its operation.This signal switching operates at a resistance of 70Ohm.This mux switch configuration has 2 elements.
7WBD3305AMUTCG Features
Supplied in the 8-UFQFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3305AMUTCG Applications
There are a lot of ON Semiconductor 7WBD3305AMUTCG Signal Switches / Multiplexers / Decoders applications.
- To select different devices in microprocessor output
- Night vision cameras
- Paper plants
- PCIe
- Electronic circuits
- Medical industry
- Medium scale TV wall
- Electronics industry
- Solenoid cooling fan
- Analog to digital conversion
