7WBD3305AMX1TCG
| Parameters | |
|---|---|
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3305 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.95mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
7WBD3305AMX1TCG Overview
This is a relatively small item of digital switch that is included in the 8-XFLGA in order to save space on the board.In this case, it is packaged as Tape & Reel (TR).For mounting, digital switch ic uses the method Surface Mount.The analog IC in the multiplexers is identified as Bus Switch.By maintaining the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.With a supply voltage of 4V~5.5V, designers have greater flexibility of digital controlled switch.The basic configuration includes 8 terminations.You can also find related parts by using its logic switch base part number of 7WBD3305.The turn signal switch is supplied with a voltage of 4.5V volts.A component pin count of 8 can be found on this turn signal switch.As the end of conductors, it uses BUTT.There is a type of supply Single that is employed in this case.This multiplexer ic has 8 pins configured.There is a family of CBT/FST/QS/5C/B members.Signal multiplexer contains 1 bits.Keeping Vsup at 4V will prevent some unwanted failures.There are no external influences on this multiplexer ic, so it consumes 1mA current.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.2 is the resistance at which it operates.A resistance of 70Ohm is used to operate it.It contains 2 elements in mux switch configuration.
7WBD3305AMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3305AMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3305AMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Electronics industry
- Night vision cameras
- Image transmission
- A robotic vehicle with the metal detector
- Microprocessor instruction decoding
- Code conversion
- Data demultiplexing
- High-performance memory systems
- Enabling different functions units in microprocessor instruction decoding
- Electronic circuits
