banner_page

7WBD3305MUTAG

8 Terminations4V~5.5V 8 Pin 7WBD3305 Signal switch2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-7WBD3305MUTAG
  • Package: 8-UFDFN
  • Datasheet: PDF
  • Stock: 618
  • Description: 8 Terminations4V~5.5V 8 Pin 7WBD3305 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 4 days ago)
Contact Plating Gold
Mounting Type Surface Mount
Package / Case 8-UFDFN
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2006
JESD-609 Code e4
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Bus Switch
Resistance 70Ohm
Subcategory Bus Driver/Transceivers
Max Power Dissipation 1.127W
Voltage - Supply 4V~5.5V
Terminal Position DUAL
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) 260
Number of Functions 2
Supply Voltage 4.5V
Terminal Pitch 0.4mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number 7WBD3305
Pin Count 8
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Elements 2
Circuit 1 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Number of Bits 1
Propagation Delay 250 ps
Quiescent Current 1mA
Turn On Delay Time 4.8 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height Seated (Max) 0.55mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

7WBD3305MUTAG Overview


Providing this information in the 8-UFDFN enables digital switch board space to be saved.Tape & Reel (TR) is the packaging method.In terms of mounting, digital switch ic uses the Surface Mount method .For the analog part of the multiplexers, an IC Bus Switch is used.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Design engineers have more flexibility when digital controlled switch operates at 4V~5.5V voltage.There is a design for terminating 8 as part of its basic configuration.As its base part number is 7WBD3305, logic switch can also be used to find its related parts.The multiplexer is supplied with 4.5V voltage.This turn signal switch has 8 component pins.Conductors terminate at NO LEAD in this design.As a type of supply, Single is employed.There are 8 pins on it.There is a family of CBT/FST/QS/5C/B members.The multiplexer ic provides 1 bits.To prevent unnecessary failures, it is recommended that the minimum supply voltage (Vsup) remain at 4V.The power supply of 5V is provided for mux switch's normal operation.This is an the digital switch ic that is classified as Bus Driver/Transceivers.Without the influence of external factors, it consumes 1mA current of multiplexer ic.Using a supply voltage of 5V can result in reliable performance of the multiplexers.A resistance of 2 governs its operation.With a resistance of 70Ohm, it operates.The mux switch configuration consists of 2 elements.

7WBD3305MUTAG Features


Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

7WBD3305MUTAG Applications


There are a lot of ON Semiconductor 7WBD3305MUTAG Signal Switches / Multiplexers / Decoders applications.

  • Signal router
  • Microprocessor input/output systems
  • Data distribution
  • CPU memory location identification
  • Speed synchronization of multiple motors in industries
  • Electronically controlled engine system
  • Enabling different functions units in microprocessor instruction decoding
  • Encrypted communications system
  • Night vision cameras
  • Injectors

Write a review

Note: HTML is not translated!
    Bad           Good