7WBD3305USG
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 weeks ago) |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 8-VFSOP (0.091, 2.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2006 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Gold/Palladium (Ni/Au/Pd) |
| Subcategory | Bus Driver/Transceivers |
| Max Power Dissipation | 498mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3305 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
7WBD3305USG Overview
Due to the fact that it is provided in the 8-VFSOP (0.091, 2.30mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).Surface Mount is the mounting method digital switch ic uses.the multiplexers uses IC Bus Switch as the analog IC.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.When digital controlled switch operates at 4V~5.5V, designers are provided with a greater degree of flexibility.It is designed with 8 terminations as part of its basic configuration.The part number for 7WBD3305 can be used to find its logic switch related parts as well.The voltage supplied for multiplexer's system is 4.5V.multiplexer's systemIn this turn signal switch, there are 8 components that can be connected to each pin.GULL WING is used as the point at which the conductors come to an end as part of this formula.Single is used as its supply type.With 8 pins, it is configured.In the CBT/FST/QS/5C/B family, the logic switch is included.Signal multiplexer provides 1 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.Normally, 5V is powered by a battery.Bus Driver/Transceivers is a category for the digital switch ics.In the absence of external influences, it consumes 1mA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.The system operates with a resistance of 70Ohm.Configuration elements for the mux switch consist of 2.
7WBD3305USG Features
Supplied in the 8-VFSOP (0.091, 2.30mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3305USG Applications
There are a lot of ON Semiconductor 7WBD3305USG Signal Switches / Multiplexers / Decoders applications.
- Data bus control
- Speed synchronization of multiple motors in industries
- Decimal decoder
- Time division multiplexing system
- Memory system of computers
- Solenoid cooling fan
- Combinational circuit
- Implementing boolean functions with multiple variables
- Make full adder
- Frequency multiplexing system
