banner_page

7WBD3306AMUTCG

8 Terminations4V~5.5V 8 Pin 7WBD3306 Signal switch2 Functions


  • Manufacturer: ON Semiconductor
  • Nocochips NO: 598-7WBD3306AMUTCG
  • Package: 8-UFDFN
  • Datasheet: PDF
  • Stock: 662
  • Description: 8 Terminations4V~5.5V 8 Pin 7WBD3306 Signal switch2 Functions(Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Lifecycle Status ACTIVE (Last Updated: 1 week ago)
Contact Plating Tin
Mounting Type Surface Mount
Package / Case 8-UFDFN
Surface Mount YES
Number of Pins 8
Operating Temperature -55°C~125°C
Packaging Tape & Reel (TR)
Published 2006
Pbfree Code yes
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
Type Bus Switch
Resistance 70Ohm
Terminal Finish Nickel/Gold/Palladium (Ni/Au/Pd)
Subcategory Bus Driver/Transceivers
Max Power Dissipation 601mW
Voltage - Supply 4V~5.5V
Terminal Position QUAD
Terminal Form NO LEAD
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 2
Supply Voltage 5V
Terminal Pitch 0.5mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Base Part Number 7WBD3306
Pin Count 8
Qualification Status Not Qualified
Operating Supply Voltage 5V
Number of Elements 2
Circuit 1 x 1:1
Power Supplies 5V
Supply Voltage-Min (Vsup) 4V
Number of Ports 2
Number of Bits 1
Propagation Delay 250 ps
Quiescent Current 1mA
Turn On Delay Time 4.8 ns
Family CBT/FST/QS/5C/B
Output Characteristics 3-STATE WITH SERIES RESISTOR
Halogen Free Halogen Free
Supply Type Single
Output Polarity TRUE
High Level Output Current -128mA
Low Level Output Current 128mA
Voltage Supply Source Single Supply
Height Seated (Max) 0.6mm
Length 1.6mm
Width 1.6mm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

7WBD3306AMUTCG Overview


In order to save board space, digital switch is located in the 8-UFDFN.As a result, it is packaged in a way that is referred to as Tape & Reel (TR).Digital switch ic uses a Surface Mount mounting method.For the analog part of the multiplexers, an IC Bus Switch is used.As long as the operating temperature is -55°C~125°C, turn signal switch will not be influenced by external factors.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.Among its basic configurations are 8 terminations.You can also find related parts by using its logic switch base part number of 7WBD3306.For multiplexer's system, 5V voltage is supplied.There are 8 component pins in this turn signal switch.NO LEAD is used as the point at which the conductors come to an end as part of this formula.There is a type of supply of Single.This multiplexer ic is configured with 8 pins.In the CBT/FST/QS/5C/B family, the logic switch is included.In this signal multiplexer, there are 1 bits that are provided.Keeping Vsup at 4V will prevent some unwanted failures.In order for 5V to operate normally, a power supply is provided.In electronic terms, the digital switch ic is classified as part number Bus Driver/Transceivers.There are no external influences on this multiplexer ic, so it consumes 1mA current.If the supply voltage is 5V, reliable performance of the multiplexers can be achieved.The resistance is 2.It operates with a resistance of 70Ohm.This mux switch configuration has 2 elements.

7WBD3306AMUTCG Features


Supplied in the 8-UFDFN package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V

7WBD3306AMUTCG Applications


There are a lot of ON Semiconductor 7WBD3306AMUTCG Signal Switches / Multiplexers / Decoders applications.

  • Communication system
  • To select different task for memory in microprocessor memory systems
  • Data demultiplexing
  • Idle motor
  • HDMI applications
  • To select different devices in microprocessor output
  • Medium scale TV wall
  • Electronics industry
  • Automatic Monitoring systems
  • Electronic circuits

Write a review

Note: HTML is not translated!
    Bad           Good