7WBD3306AMX1TCG
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | 7WBD3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.95mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
7WBD3306AMX1TCG Overview
As a means of saving space, digital switch is provided in the 8-XFLGA.Tape & Reel (TR) is the packaging method.Digital switch ic adheres to a mounting method of Surface Mount.In the multiplexers, the analog IC Bus Switch is used.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.When operated with a 4V~5.5V supply voltage, digital controlled switch provides digital controlled switch's superior flexibility for designers.The basic configuration of this system includes 8 terminations.There is a base part number 7WBD3306 that can be used to locate signal switch's related components as well.The turn signal switch is supplied with a voltage of 5V volts.In this turn signal switch, there are 8 components that can be connected to each pin.Using the point BUTT as an end point of conductors, it is used to determine the terminus of a conductor.In this case, Single is employed as the supply type.The board is configured with 8 pins.The logic switch is a member of the CBT/FST/QS/5C/B family.There are 1 bits in signal multiplexer.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.It consumes 1mA current of multiplexer ic without external influences.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.The system operates with a resistance of 2.In terms of resistance, it has a value of 70Ohm.The mux switch configuration contains 2 elements.
7WBD3306AMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3306AMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3306AMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Speed synchronization of multiple motors in industries
- Recording transmission
- Arithmetic Logic Units
- Logic circuits
- Transmission from the computer system of a satellite
- D/A converters
- Injectors
- To select different devices in microprocessor input
- A/D converters
- Make half adder
