7WBD3306CMX1TCG
| Parameters | |
|---|---|
| Low Level Output Current | 128mA |
| Voltage Supply Source | Single Supply |
| Height Seated (Max) | 0.4mm |
| Length | 1.45mm |
| Width | 1mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Mounting Type | Surface Mount |
| Package / Case | 8-XFLGA |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -55°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Type | Bus Switch |
| Resistance | 70Ohm |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Power Dissipation | 274mW |
| Voltage - Supply | 4V~5.5V |
| Terminal Position | BOTTOM |
| Terminal Form | BUTT |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.35mm |
| Base Part Number | 7WBD3306 |
| Pin Count | 8 |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Circuit | 1 x 1:1 |
| Supply Voltage-Min (Vsup) | 4V |
| Number of Ports | 2 |
| Number of Bits | 1 |
| Propagation Delay | 250 ps |
| Quiescent Current | 1mA |
| Turn On Delay Time | 4.8 ns |
| Family | CBT/FST/QS/5C/B |
| Output Characteristics | 3-STATE WITH SERIES RESISTOR |
| Halogen Free | Halogen Free |
| Supply Type | Single |
| Output Polarity | TRUE |
| High Level Output Current | -128mA |
7WBD3306CMX1TCG Overview
It is included in the 8-XFLGA in order to save board space.Tape & Reel (TR) is the packaging method.digital switch ic uses the method of Surface Mount for mounting.the multiplexers uses an analog IC Bus Switch.A temperature of -55°C~125°C will not leave the turn signal swturn signal switchch susceptible to external influences.Designers have greater flexibility using digital controlled switch when it works with 4V~5.5V voltage.Its basic configuration includes terminations in the 8 range.As its base part number is 7WBD3306, logic switch can also be used to find its related parts.The multiplexer's system is supplied with a voltage of 5V.This turn signal switch has 8 component pins.It employs BUTT as the point at which conductors come to an end.There is a type of supply of Single.With 8 pins, it is configured.There is a family of CBT/FST/QS/5C/B members.As a result, signal multiplexer provides a total of 1 bits.The minimal supply voltage (Vsup) should be kept at 4V to avoid some unnecessary failures.There are no external influences on this multiplexer ic, so it consumes 1mA current.Reliable performance of the multiplexers can be achieved when a supply voltage of 5V is provided.The signal switching operates with a resistance of 2.The resistance of the signal switching is 70Ohm.Configuration elements for the mux switch consist of 2.
7WBD3306CMX1TCG Features
Supplied in the 8-XFLGA package
Adopting a supply type of Single
Operating with the supply voltage of 5V
7WBD3306CMX1TCG Applications
There are a lot of ON Semiconductor 7WBD3306CMX1TCG Signal Switches / Multiplexers / Decoders applications.
- Enabling different functions units in microprocessor instruction decoding
- Data communication
- Audio transmission
- Textile mills
- Image transmission
- Seven segment displays
- Data distribution
- To select different task for memory in microprocessor memory systems
- Decimal decoder
- Electronic circuits
