Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 1 week ago) |
Contact Plating |
Gold |
Mounting Type |
Surface Mount |
Package / Case |
8-TSSOP (0.173, 4.40mm Width) |
Surface Mount |
YES |
Number of Pins |
8 |
Operating Temperature |
-55°C~125°C |
Packaging |
Tape & Reel (TR) |
Published |
2006 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
Type |
Bus Switch |
Resistance |
70Ohm |
Subcategory |
Bus Driver/Transceivers |
Max Power Dissipation |
833mW |
Voltage - Supply |
4V~5.5V |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Number of Functions |
2 |
Supply Voltage |
5V |
Terminal Pitch |
0.65mm |
Base Part Number |
7WBD3306 |
Pin Count |
8 |
Qualification Status |
Not Qualified |
Operating Supply Voltage |
5V |
Number of Elements |
2 |
Circuit |
1 x 1:1 |
Power Supplies |
5V |
Supply Voltage-Min (Vsup) |
4V |
Number of Ports |
2 |
Nominal Supply Current |
1μA |
Number of Bits |
1 |
Propagation Delay |
250 ps |
Quiescent Current |
1mA |
Turn On Delay Time |
4.8 ns |
Family |
CBT/FST/QS/5C/B |
Output Characteristics |
3-STATE WITH SERIES RESISTOR |
Halogen Free |
Halogen Free |
Supply Type |
Single |
Output Polarity |
TRUE |
High Level Output Current |
-128mA |
Low Level Output Current |
128mA |
Voltage Supply Source |
Single Supply |
Length |
4.4mm |
Width |
3mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
7WBD3306DTR2G Overview
Due to the fact that it is provided in the 8-TSSOP (0.173, 4.40mm Width), digital switch allows the board to be compacted.As a result, it is packaged in the way of Tape & Reel (TR).Digital switch ic adheres to a mounting method of Surface Mount.the multiplexers uses an analog IC Bus Switch.By keeping the operating temperature at -55°C~125°C, turn signal switch will not be affected by external factors.The turn signal switch is designed for use with a 4V~5.5V supply voltage, which gives it a lot of flexibility.The basic configuration includes 8 terminations.There is a base part number 7WBD3306 that can be used to locate signal switch's related components as well.For multiplexer's system, a voltage of 5V is supplied.This turn signal switch contains 8 component pins.It is the end of conductors that is represented by GULL WING.This supply type employs Single.This multiplexer ic has 8 pins configured.Among the family of CBT/FST/QS/5C/B the logic switch is a member.Signal multiplexer provides 1 bits.Keep Vsup at 4V to avoid unnecessary failures.There is a power supply provided for the mux switch's normal operation of 5V.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 1mA current of multiplexer ic.When a supply voltage of 5V is used, reliable performance of the multiplexers can be achieved.As far as the resistance is concerned, it operates with 2.In terms of resistance, it has a value of 70Ohm.This mux switch configuration has 2 elements.
7WBD3306DTR2G Features
Supplied in the 8-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 5V
Operating with the supply voltage of 5V
7WBD3306DTR2G Applications
There are a lot of ON Semiconductor 7WBD3306DTR2G Signal Switches / Multiplexers / Decoders applications.
- Home automation system
- Implementing boolean functions with multiple variables
- Data distribution
- Logic gates for other digital devices
- War field flying robot with a night vision flying camera
- Time division multiplexing system
- Enabling block of memory depending on address in memory chips
- Used to connect a single source to multiple destinations
- Seven segment displays
- Control unit of Central Processing unit (CPU)